• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

V7 III Rizoma Bits

GTM®

Administrator
Staff member
GT di Razza Pura
Joined
Jul 1, 2009
Messages
15,055
Location
Malibu
Guys & Gals, Rizoma just released V7 III specific accessories; https://www.rizoma.com/en/motorcycle/inspiration-gallery?brand=61 -- We have some of the items online now;

Retro Race Handlebars; https://gtmotocycles.com/products/rizoma-retro-race-handlebars
Alum. Flyscreen Fairing: https://gtmotocycles.com/products/rizoma-v7-iii-headlight-fairing
License Plate Kit; https://gtmotocycles.com/products/rizoma-v7-iii-led-rear-fender-plate-kit
Res Cover; https://gtmotocycles.com/products/rizoma-v7-iii-brake-res-cover
Footpegs and adapters; https://gtmotocycles.com/products/rizoma-street-pegs
Turn signal adapter plates; https://gtmotocycles.com/products/rizoma-turn-adapter-plates

Contact me direct email if there's anything else there you want for sure; Info at GuzziTech.com — and I'll get in online on the Store tab above — Or if there is any particular thing in the line you'd like for me to test, post below.

Rizoma V7III

Rizoma V7III 2

Rizoma V7III 3
 
I know this says v7-III but since it's 7/8ths will it work for the v7-1/2?
 
Todd, would the pegs work on my 2017 V7 III Special? Need adaptor and pegs, correct? Interested if easy install.
 
Todd, would the pegs work on my 2017 V7 III Special? Need adaptor and pegs, correct? Interested if easy install.
Based on what I have installed with them so far, answer is yes on the adapters. I will find out tomorrow and post again, or better yet, just email me direct; Todd at GuzziTech.com
 
Todd, would the pegs work on my 2017 V7 III Special? Need adaptor and pegs, correct? Interested if easy install.
Posting again on this... yes, adapters are required ($32/pair), so I'll include them in the pricing on the set of pegs. Which were you looking at? I'll get them online.
 
Finally getting around to upgrading my front turn signals. I want to match with my rear Rizoma Iride ones. Am I correct that I will need the adapter bracket too?

What about the Rizoma Reverse Retro bar end mirror -- do they need anything special for installation ?
 
Finally getting around to upgrading my front turn signals. I want to match with my rear Rizoma Iride ones. Am I correct that I will need the adapter bracket too?
What about the Rizoma Reverse Retro bar end mirror -- do they need anything special for installation ?
Yes, and you’ll be using the new mirrors on your stock bars? Purchase from me and I include needed spacers.
 
Yes, and you’ll be using the new mirrors on your stock bars? Purchase from me and I include needed spacers.

Santa brought me a set of Rizoma turn signals. Todd -- I notice on your site you have one set of adapters in stock.... Since I'm local, can I just make a run down the 91 to your shop instead of paying for shipping?
 
Santa brought me a set of Rizoma turn signals. Todd -- I notice on your site you have one set of adapters in stock.... Since I'm local, can I just make a run down the 91 to your shop instead of paying for shipping?
Sandy, send me an email please. I think my system allows purchase for pick up will call from my shop.
 
Do the Retro Race bars require and modifications to cable length/routing on a V7 III?
From a stock bar V7, possibly depending on if you care how the routing looks. Ideally the Racer clutch cable would work best, but it's not mandatory, no. More importantly to note is the 1-1/8" bar risers are needed, not the stock 7/8" size.
I never had enough takers to do these in a complete 7/8" GTM bar, though I do make them in-house now in the 1-1/8" center like the Rizomas; https://gtmotocycles.com/products/gtm-cafe-racer-handlebars
 
Would the RIZOMA IRIDE work for the front signals turning them into running lights / turn signal combo? Besides buying the pair, what else do I need besides the RIZOMA TURN ADAPTER PLATES? I have a 2020 V7 III Stone and would like to replace the stock front signals and have running lights. Thanks
 
Would the RIZOMA IRIDE work for the front signals turning them into running lights / turn signal combo? Besides buying the pair, what else do I need besides the RIZOMA TURN ADAPTER PLATES? I have a 2020 V7 III Stone and would like to replace the stock front signals and have running lights. Thanks

I run them on my v7-I - run as turn signals and run night lights. I’ve attached photo. Turn to yellow when signaling. They look great.

Have to let others speak on what you all need because I sent my bike to Guzzitech for the install because id screw it up.
 

Attachments

  • 0A39C20F-8178-4505-B8C9-AD95FF305DC2.jpeg
    0A39C20F-8178-4505-B8C9-AD95FF305DC2.jpeg
    90.4 KB · Views: 16
Bar end mirrors have value in resolving just what issue you are having. We have many plug and play options on the STORE tab link above.
Thank you, Vin sent. I love the Rizoma line but don't want to buy everyone. Genesi? Radial? 4D? Reverse Radial? These are all larger than my current "one"'s. My body and arms get in the way of these. A review was saying how the reverse radial has a flare on the end and can see 2 lanes and behind you. ???
 
Genesi? Radial? 4D? Reverse Radial? These are all larger than my current "one"'s. My body and arms get in the way of these.
Again, any bar end will be superior to stock location mirror mounts. All that you listed have a convex edge to give greater/wider side angle viewing. The 4Ds are only available in stock mount style.
 
Hi Todd,
Just purchased the adaptors and the wire extension kit from you to install Rizoma iRide on V7II. Do you have an instructions on self installation (Your shop is too far for me to drop in). Thanks!
 
Back
Top