HIPMAN BRS
Just got it firing!
Suggestions please - my 1000 SP was a bit reluctant to start when warm. Few weeks ago - not starting - no spark. So - I have new battery - replaced the coils 9 old ones were reading 3 ohm and with the reluctant warm start thought then might be issue. I fitted new HT leads and caps with the coils - points were past there best so replaced them too. All done - and no still no spark. I have power to the coils 11.6 V when battery reading 12.6 V ( even running cable direct t from battery +ve to coil doesn't give spark) 11.6 V at springy bit on points when points open. 5k ohm wish from end coil end of HT lead to inside spark plug cap terminal. Ive tried changing plugs . All to no effect. Im at a loss as why no spark. And yes checked plug conducting back to battery -ve terminal. Help please
;-)
;-)