• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

ARROW END CANS

G

GEO

Tuned and Synch'ed
Joined
Oct 31, 2015
Messages
43
Location
ATHENS GREECE
Hi guys
Just to say that the pair of arrow end cans I installed on my V7ii R are doing a really good job.I put them on just as they are from the factory-no buffle removal not any upgrade to the ECU (there are not any available as far as I know yet)-and the benefits are obvious from the start.
The sound is more 'baso' but at the same level as the OEM ones,the torque gain though is evident to the whole rpm range leading to a more pleasing driving experience even if commuting in town or playing in curvy roads.
I dont know if installing a K&N air filter will add something or leading to a lean mixture state which is no good for performance or the engine,please help me If you can whith your experience.
Finally I ordered a MATRIS fork kit (the one with the springs included) and I want to know if you have to dismandle the forks in order to install it or if the job can be done by just removing the top cups.
THANKS.
 
I have the Arrows and Matris kit too. No need to disassemble forks, its a drop in kit. Based on input from others I chose to not install a K&N filter. Everyone has a different opinion. The reasons I choose to stay with OEM is they are inexpensive and they work, my bike runs perfect with the OEM paper and Arrow Cans.
 
You must log in or register to reply here.
Back
Top