geodoc
Cruisin' Guzzisti
- Joined
- Oct 27, 2008
- Messages
- 205
header pipe ID: 38mm
Cam: Megacyc;e 620X10
Displacement: 917cc
Cam: Megacyc;e 620X10
Displacement: 917cc
ed said:I'd suggest heading back to the dyno with a different exhaust. You may be surprised. That and the cam will significantly affect your midrange. 2 into 1's on Guzzis are difficult to get right the first time you fab one up. Anti reversion cones are a last ditch effort to solve a very specific problem and will probably not be helpful here.
If you want some help, George, please post the exhaust pipe primary ID, cam, and displacement of the motor. Good luck.
Ed