• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.

fork kit install

francod123

francod123

Cruisin' Guzzisti
Joined
Aug 2, 2013
Messages
419
Reaction score
31
Location
Maryland
Did folks who installed fork kits on their V7, such as the Matris kit, install any new fork oil seals, gaskets, etc.? I don't know if it's recommended to replace the seals once you start ripping things apart. My bike has about 6800 miles on it.

Also, can't seem to pin down a part number for V7 Stone fork oil seals in the parts catalog.

Thanks.
 
Since the forks do not need to be completely disassembled for the Kit install, and if it is well below 30k miles, no need to change or replace anything bushing or seal wise, no.
 
is a box end wrench or deep socket wrench needed to install the new matris caps, and are they 30mm like the OEM caps?
 
Yes, pretty sure I use a 32mm 1/2" drive standard depth 6-pt socket. A deep would work as well of course or a wrench, yes.
 
Sorry to restart an old thread, but when I remove the stock sleeve and washer and spring do I just drop the new valve and stuff in from there or do I have to remove anything else first? Thanks @GT-Rx®
 
It's a matris FKE fork kit. Instructions are vague and this is my first time tackling this type of job.
 
pokeyjoe said:
Are you installing an emulator? If so, there is a bit more work involved. No instructions?
Click to expand...


I think I have to take the rest out, I tried looking at the manual and searching all over online, I can find the diagrams and exploded parts views but not how to actually remove or install
 
Guys, please just email me for technical questions, I don't live on the Forum all of the time.
Remove the spacer and spring. Install the flow valve and spring, add and measure oil level, then add spacer and cap.
 
GT-Rx® said:
Guys, please just email me for technical questions, I don't live on the Forum all of the time.
Remove the spacer and spring. Install the flow valve and spring, add and measure oil level, then add spacer and cap.
Click to expand...


Thanks for the reply Todd, I posted here since it was weekend after hours and was seeing if anyone else with experience might chime in because I'm currently elbow deep in this. I just want to make sure I'm clear before I mess something up. When you say install the flow valve just drop it in or do I need to remove a stock valve and replace it with this one, type of install. Thanks for the help.
 
GT-Rx® said:
Remove the spacer and spring. Install the flow valve and spring, add and measure oil level, then add spacer and cap.
Click to expand...

No extra holes in the damper tubes like the RaceTech emulators? How does that work?

Edit: Not really an emulator. Just a kit with an external pre-load adjustment and a "flow valve."
 
Last edited:
corradooo said:
Thanks for the reply Todd, I posted here since it was weekend after hours...
Click to expand...
Quick questions I can usually reply to as long as I'm awake or not on the bike.
Nothing else to remove other then the springs and spacers. The flow valve sits into the stock damper rod. Make sure it sits firmly into the damper rod.
 
You must log in or register to reply here.
Back
Top