I wanted a list of fuses for adding accessories so will share what I typed into my Notes from the manual (p 117):
https://www.guzzitech.com/forums/resources/v100-stelvio-owners-manual.279/
MAIN beneath tank.
40A Charges battery
30A Loads of entire vehicle
Spares
AUX FUSES - RIGHT
A 10A Rear position,
horn,
license light
B 5A Fog lamps
C 7.5A ECU
instrument panel
RH Light switch
Inertial platform
stand
TMPS (if provided)
Rear radar
Main ignition relay
D Free
E 7.5A GMP
Anti theft system
F 7.5A Headlamp
G 3A USB Port
[NOTE: The Owners Manual says the port is only rated for 1A and the blue/orange wires serving the fatter red/black set are a very thin gage. From an engineering perspective this is appropriate as the rule of thumb is to rate the fuse at 3 times the power used by whatever the device is at the end of the wire.]
AUX FUSES - LEFT
H 15A Power supply for:
Fan relay
ECU
Fuel pump relay
RH and LH Lambda probe
RH and LH injectors
RH and LH coils
Secondary air valve
Purge valve
Alternator
I 5A Power for anti theft device
OBD2
L 7.5A Fan power feed
M 7.5A ECU Permanent positive lead
N Free
O 5A Instrument panel power supply
Turn indicators
P 20A ABS Power feed
Note that there are differences in the Mandello book. https://www.guzzitech.com/forums/resources/v100-mandello-owners-manual.263/
https://www.guzzitech.com/forums/resources/v100-stelvio-owners-manual.279/
MAIN beneath tank.
40A Charges battery
30A Loads of entire vehicle
Spares
AUX FUSES - RIGHT
A 10A Rear position,
horn,
license light
B 5A Fog lamps
C 7.5A ECU
instrument panel
RH Light switch
Inertial platform
stand
TMPS (if provided)
Rear radar
Main ignition relay
D Free
E 7.5A GMP
Anti theft system
F 7.5A Headlamp
G 3A USB Port
[NOTE: The Owners Manual says the port is only rated for 1A and the blue/orange wires serving the fatter red/black set are a very thin gage. From an engineering perspective this is appropriate as the rule of thumb is to rate the fuse at 3 times the power used by whatever the device is at the end of the wire.]
AUX FUSES - LEFT
H 15A Power supply for:
Fan relay
ECU
Fuel pump relay
RH and LH Lambda probe
RH and LH injectors
RH and LH coils
Secondary air valve
Purge valve
Alternator
I 5A Power for anti theft device
OBD2
L 7.5A Fan power feed
M 7.5A ECU Permanent positive lead
N Free
O 5A Instrument panel power supply
Turn indicators
P 20A ABS Power feed
Note that there are differences in the Mandello book. https://www.guzzitech.com/forums/resources/v100-mandello-owners-manual.263/
Last edited: