MotoBozo
Just got it firing!
It would be great to hear feedback after you get the flyscreen installed.I have the same question as I have one on its way to me.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It would be great to hear feedback after you get the flyscreen installed.I have the same question as I have one on its way to me.
So I installed it today. You reuse the 3 rubber gaskets inside the original speedo to attach the bracket so it will be the same as the original .To those that have installed and ridden with the bracket installed. Is there any vibration, flex, or bounciness while riding?
Thank you
Who needs instructions when you do this! Thank you very much !!I didn’t get any. I removed the two bolts on top of the current speedo mount (T15 I believe), make sure you have a 10mm wrench on the bolt on the bottom of the main two screws.
Removed the two torx screws (T10 or something I can’t remember) in the back of the speedo.
Separate the back of the speedo from the front.
Two sets of wires are there, both need the zip tie cut to detach from original mount.
Remove the three Phillips metal screws.
Remove the three rubber discs from the original mount and attach to the new plate.
The dual wire with the terminated/capped end doesn’t attach to anything on the new mount, just make sure it’s in between the speedo once it’s put back together it shouldn’t fall out… or find a way to attach it maybe with heat glue. I didn’t bother.
Put the original T15s in and you should be set.
Bear in mind there are two angles there or do you want a straight line?What is the measurement from edge of the for crown to the top edge of the gauge?
View attachment 36435
Just a straight line.Bear in mind there are two angles there or do you want a straight line?
Thank you!
Thanks for posting here. If you could also post as a review (at the bottom) on the purchase page, it would be most helpful and appreciated;Quick feedback