- Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
- Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
- There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
- Joined
- Jun 26, 2011
- Messages
- 6,504
- Reaction score
- 8,161
Have you looked at the offerings here in Todd's store?
https://www.guzzitech.com/store/category/exhaust/
He has an underbody version for the Griso, but he more than likely can fabricate what you want or give you some pretty cool options.
https://www.guzzitech.com/store/category/exhaust/
He has an underbody version for the Griso, but he more than likely can fabricate what you want or give you some pretty cool options.
That looks like the BAAK V7 Bobber exhaust.
It's not... but it looks similar (see below).
But I agree with scottmastrocinque, shoot Todd an email (Todd at GuzziTech.com) and he'll be able to fill you in on the options that he has available. I know he was both short and super-stubby mufflers for the Guzzi-Tech V7 2>1 exhaust system, so I wouldn't be surprised if he has something similar to what you're looking for for the 2>2 system.
It's not... but it looks similar (see below).
But I agree with scottmastrocinque, shoot Todd an email (Todd at GuzziTech.com) and he'll be able to fill you in on the options that he has available. I know he was both short and super-stubby mufflers for the Guzzi-Tech V7 2>1 exhaust system, so I wouldn't be surprised if he has something similar to what you're looking for for the 2>2 system.
Wisconsin v7 Racer
Cruisin' Guzzisti
Here's one option which says it's from Guzzitech.
If you stick with the exhaust systems here, Todd can correct the fueling to match the breathing.
Thanks guys.
The first picture is likely just a cut down stock header with a muffler hanging on end. Plenty wrong on every level with it.
The other system noted above from France is a better attempt, but one person (here) who purchased it said it was extremely loud (no surprise), and last and most important should be what does it do for power/drive-ability; Where are the power charts and fueling resolutions from them?
I can likely build this for you, but know that it will be LOUD and you will need my ECU Flash Tool to fix the fueling.
The first picture is likely just a cut down stock header with a muffler hanging on end. Plenty wrong on every level with it.
The other system noted above from France is a better attempt, but one person (here) who purchased it said it was extremely loud (no surprise), and last and most important should be what does it do for power/drive-ability; Where are the power charts and fueling resolutions from them?
I can likely build this for you, but know that it will be LOUD and you will need my ECU Flash Tool to fix the fueling.
Yes, that's one of mine.
I've almost completed a new slight re-design that I will be showing off soon.
Wahoo650
Tuned and Synch'ed
That first system is very similar to BAAK's. A little different muffler. IIRC Todd is looking into carrying some of their equipment, much of which is quite nice. Personally, I think a system that short, depending on headpipe ID will be giving up some bottom end in exchange for a "look". Todd's systems, from all reviews and pictures will give you both looks and performance.
baakmotocyclettes.com/en/
baakmotocyclettes.com/en/
Hey guys, I know this thread is over a year old but I've been interested in an exhaust system like this for a while now cause I think they're absolutely gorgeous. I just wanted to see if after a year passing there's any more options, etc...?
I'd be really interested in seeing all of what Todd came up with cause while I think that BAAK exhaust is beautiful, I wouldn't be surprised to see Todd coming up with something that not only looked great but sounded and performs great too.
I'd be really interested in seeing all of what Todd came up with cause while I think that BAAK exhaust is beautiful, I wouldn't be surprised to see Todd coming up with something that not only looked great but sounded and performs great too.
Wisconsin v7 Racer
Cruisin' Guzzisti
This is my setup. I also purchased the stubby "muffler" but it's extremely loud and it just sits on the shelf now. This one is still loud enough and looks nice. This setup from guzzitech is a few years old now so his design and offerings has changed some.
I have an almost identical set up, and I am surprised at how many unsolicited compliments I get on them (and, yes, they perform and sound great!)
Todd also has a 2>2 system that retains the stock look, for anyone who prefers that style, and, as Wisconsin V7 Racer, hinted, there's a wide choice of final mufflers.
Also - funny that you mention the stubby - I was just thinking of asking Todd about trying one on my bike. Based on your comparative report, I think I already know which one I'll want to keep (the current one!)
Todd also has a 2>2 system that retains the stock look, for anyone who prefers that style, and, as Wisconsin V7 Racer, hinted, there's a wide choice of final mufflers.
Also - funny that you mention the stubby - I was just thinking of asking Todd about trying one on my bike. Based on your comparative report, I think I already know which one I'll want to keep (the current one!)
