- Joined
- Dec 29, 2008
- Messages
- 315
- Reaction score
- 200
This refers to the Sport 1200 that Todd just posted the dyno runs for. I had purchased this Sport earlier this year and it was equipped with uni pods on the throttle bodies, QD muffler and the GTM ECU reflash. This bike ran well but at elevation was obviously down on power and far too rich on the bottom and midrange of the rpm’s. I decided to have Todd install the PC and Autotune with a dyno tune.
I took the bike out into the back roads of north San Diego county and am very pleased with the change in the fueling, the smoothness of the motor and also the acceleration. All the popping and backfiring that I got on deceleration is gone, the bike starts and idles better than before and overall the bike just performs better.
This modification is one I would highly recommend to anyone wanting an overall better running bike.
I took the bike out into the back roads of north San Diego county and am very pleased with the change in the fueling, the smoothness of the motor and also the acceleration. All the popping and backfiring that I got on deceleration is gone, the bike starts and idles better than before and overall the bike just performs better.
This modification is one I would highly recommend to anyone wanting an overall better running bike.