Speed Bleeders

[Sasazuka]

Any body using them on the 1400 and know the correct size?

I bought Goodridge SB8125L 8mm x 1.25mm as that's what was recommended when searched, however they are too big.

Stock bleeders measured to be 6.8mm thick at the thread.

Just checking to see if/what others are using.

 

[scott_m]

People, please do not start a new thread BEFORE checking existing posts.

Please USE the SEARCH function. I always use the Google version of the native SEARCH function.



If you had done this, you would have instantly found this:

https://www.guzzitech.com/forums/threads/rear-brake-pad-replacement.18267/#post-151502

 

[Sasazuka]

Thank You

Copied from 1400 rear brake thread ;

Front Calipers: (1 bleeder each caliper) Russell 639570, M7x1.0 {chrome}
Rear Caliper: (one bleeder only) Russell 639520, M8x1.25 by 28mm long {chrome}
Master Cylinders, Both@handlebars: Russell 639570, M7x1.0 by 29mm long {chrome}
Clutch Slave Cylinder: Goodridge SB1010, M10x1.0 by 34mm long {chrome}