danketchpel
Tuned and Synch'ed
It seems like my front M/C won't hold pressure after the last fluid flush.
I'm not sure why, the fluid came out looking almost new. It was OK for a couple weeks then it started to not hold pressure when I pull the lever back kinda slowly.
I've been searching for a rebuild kit or even a replacement new M/C without much luck.
I believe it's a PS 16/22, 16mm bore and what's unique about the configuration is the mirror mount, maybe also the brake light switch, not sure.
Any suggestions or guidance most welcome.
I'm not sure why, the fluid came out looking almost new. It was OK for a couple weeks then it started to not hold pressure when I pull the lever back kinda slowly.
I've been searching for a rebuild kit or even a replacement new M/C without much luck.
I believe it's a PS 16/22, 16mm bore and what's unique about the configuration is the mirror mount, maybe also the brake light switch, not sure.
Any suggestions or guidance most welcome.
Last edited: