To resolve the age old tank pressurization issue and poor running, below is a guide to do so with minimal fuss and to keep fumes out of your storage space. In short, you need to plug the line that comes from the red circled fitting below. It should be the one that goes to the top of the Bosch valve shown. If it is, plug there (with an M8 bolt recommended) and leave the top of the valve to open air. We strongly do not recommend a vacuum cap at the fitting circled.
Plastic tip over valve shown below. Heat that and pop it apart to gut it, and snap back together.
That’s all you have to do. Post pics on your solution.
Donations to the site for the help here is appreciated.
Plastic tip over valve shown below. Heat that and pop it apart to gut it, and snap back together.
That’s all you have to do. Post pics on your solution.
Donations to the site for the help here is appreciated.