Hey All;
I am looking at getting the following wireless helmet brake light.
https://www.ebay.ca/itm/Motorcycle-...ash=item5451ff00b9:g:TzwAAOSwk1haAqWq&vxp=mtr
What I am wondering is exactly how I wire the transmitter to the brake and turn signals. I see that the controller has ground and brake and turn wires (4 in total). Looks like in the Guzzi wiring diagram I would have to splice/connect each of the 4 to one of the Guzzi wires. Is that about right?
This is the Guzzi tail wiring,
This is the Transmitter wiring.
I am looking at getting the following wireless helmet brake light.
https://www.ebay.ca/itm/Motorcycle-...ash=item5451ff00b9:g:TzwAAOSwk1haAqWq&vxp=mtr
What I am wondering is exactly how I wire the transmitter to the brake and turn signals. I see that the controller has ground and brake and turn wires (4 in total). Looks like in the Guzzi wiring diagram I would have to splice/connect each of the 4 to one of the Guzzi wires. Is that about right?
This is the Guzzi tail wiring,
This is the Transmitter wiring.