I changed my headstock bearing today. When I took the headlight off I noticed that the reflector was very wobbley inside kind of rotating around the fixed bolt with a black cap while I could slide the adjustment screw in and out of the housing.
Looking into the headlight the adjustment screw sits in a white socket. The part with an arrow I would have thought should be fixed to the housing.
If anyone has their headlight open could you just check whether yours is fixed or loose.
I took a video clip but am not sure how to upload it into guzzitech.
Looking into the headlight the adjustment screw sits in a white socket. The part with an arrow I would have thought should be fixed to the housing.
If anyone has their headlight open could you just check whether yours is fixed or loose.
I took a video clip but am not sure how to upload it into guzzitech.