• NOTICE: Starting March 24th, we've shifted to a mandatory user Account upgrade (donation) to post here. Once you've created an account, see the SITE SUPPORT section at the bottom on how to upgrade. This is to help try and cover site costs, and reduce redundant and argumentative posts. Small $ donations via our link above will not be considered. We still require ONE post in the Intro section (bottom of the main Forum section list) to introduce yourself: NO QUESTIONS THERE - THEY WILL BE DELETED; Search and read first before staring a new thread, most topics are WELL covered here. Also to NOTE, the owner of this website lost his home in the L.A. Wildfire storm in January; See the USA section for more details. Your consideration and understanding on use of this site is expected. It's NOT a free social media platform - decades of time and personal money are invested. We have a zero tolerance policy on attacks. Do NOT write us direct and ask questions unrelated to the Forum, we do not offer Tech support direct, they will be deleted.

V7 III Stone fuel tank removal?

gtista

Just got it firing!
GT Contributor
Joined
Mar 29, 2022
Messages
6
Reaction score
4
Location
Solomons, MD
Well, this is probably one of the stupidest questions I have asked in a long time.

How do I remove the fuel tank from my 2019 V7III Stone? I removed the bolt at the rear of the tank . The tank will rock up and down a bit. But, if I try to lift the front of the tank or slide it back -- no go. Is it possibly hung up on the rubber donuts it looks like from the parts list the tank hangs on toward the front? If so, is that a straight up lift or a slide back and lift? Or, am I just being a wuss and need to really wind up on it and heave the darned thing loose?

BTW, here's a pic of the bike. Hepco bags, Sato Racing rearsets, Dart fly screen. Love it.
 

Attachments

  • Bags pic.webp
    Bags pic.webp
    54.2 KB · Views: 7
It's been a few years, but, It was a pullback while wiggling and yes the rubbers are stuck. Lube them before reassembly. Also the fuel line might be holding you back it has a quick disconnect.
There is a fuel filter change tutorial here. Search for it.
 
The two rubber discs were REALLY STUCK on my bike. A long blast of WD 40 freed up the little boogers just fine. I read, somewhere, that pressure in the fuel line can make the quick release fitting hard to get loose. I turned the key on and gave it a very short push on the starter button and that seemed to free up the fitting. Yep, it's pull back and lift up. I was surprised at how far rearward I had to pull the tank
 
The two rubber discs were REALLY STUCK on my bike. A long blast of WD 40 freed up the little boogers just fine. I read, somewhere, that pressure in the fuel line can make the quick release fitting hard to get loose. I turned the key on and gave it a very short push on the starter button and that seemed to free up the fitting. Yep, it's pull back and lift up. I was surprised at how far rearward I had to pull the tank

Actually you want to disconnect the electrical connection to the fuel pump then try to start. If it starts and dies that is OK too. Once the pressure is released it is much easier to disconnect the fuel fitting.
 
Actually you want to disconnect the electrical connection to the fuel pump then try to start. If it starts and dies that is OK too. Once the pressure is released it is much easier to disconnect the fuel fitting.
Indeed, do this. I did not the first time. What a mess.
 
Thanks to all on the tank removal info. Actually used the wooden handle of my bench brush between the steering stem and the front of the tank to lever it loose a bit, then hosed the rubbers with silicone rubber lubricant. All is well now.
 
Back
Top