Night_Wolf
Just got it firing!
I have a set of slim LED lights that I wish to add beside my plate on my V85 TT
I have managed to get the left & right signals working & I can get the Running lights to work, but I can't seem to get the Brake lights to work. The lights I am using came with a standard 4 wire flat plug. I have used Posi-Taps to tap into the power. I can get either running lights or brake lights, but if I try to connect both, the brake lights turn OFF the running lights & I still don't have a brake light. Can anyone help point me in the correct direction
Blue == Left Signal
Red == Right Signal
Yellow == Hot/running lights
Yellow/Black == Hot/plate light
yellow/green == hot brake
Light Blue == ground
I have managed to get the left & right signals working & I can get the Running lights to work, but I can't seem to get the Brake lights to work. The lights I am using came with a standard 4 wire flat plug. I have used Posi-Taps to tap into the power. I can get either running lights or brake lights, but if I try to connect both, the brake lights turn OFF the running lights & I still don't have a brake light. Can anyone help point me in the correct direction
Blue == Left Signal
Red == Right Signal
Yellow == Hot/running lights
Yellow/Black == Hot/plate light
yellow/green == hot brake
Light Blue == ground
Last edited: