Jon
Just got it firing!
I installed a set of used Knight Design lowering footpegs a few weeks ago (love the extra space!). They came with one Woodcraft eccentric,adjustable folding toe piece. The lower peg position on the shifter side is better than stock, so I want to install the Woodcraft toe piece on the right / brake side.
I expected a hex / Allen head on the back, but it is smooth. There is a 12mm nut beside the rubber on the outside of the lever. This nut is both very thin (hard to get a wrench on) and very tight. I don't want to do damage.
There is nothing in the manual about removal of the toe piece.
Have any of you removed one?
I expected a hex / Allen head on the back, but it is smooth. There is a 12mm nut beside the rubber on the outside of the lever. This nut is both very thin (hard to get a wrench on) and very tight. I don't want to do damage.
There is nothing in the manual about removal of the toe piece.
Have any of you removed one?