Breva 1100 Side Stand.
The foot of the side stand is rather small.
This is what I have done to change that. (see attachment).
It is a little different to that posted for use on a Stelvio (I think).
Before I fitted the springs, it seemed that it would foul the exhaust pipe, but, fitting the springs cured that.
The material used is approx 50x50x6mm mild steel welded to the original foot, not overlapping on the inside corner nearest the back wheel.
Hope this helps someone
Cheers
organfixsing
The foot of the side stand is rather small.
This is what I have done to change that. (see attachment).
It is a little different to that posted for use on a Stelvio (I think).
Before I fitted the springs, it seemed that it would foul the exhaust pipe, but, fitting the springs cured that.
The material used is approx 50x50x6mm mild steel welded to the original foot, not overlapping on the inside corner nearest the back wheel.
Hope this helps someone
Cheers
organfixsing