Checked out manual to perform this change. It talks about changing code first then proceeding through menu options. I dont understand the procedure I guess because using my two keys doesn't seem to do anything. It seems to indicate that this should come up on the dash, but I get zilch. What am I doing wrong? If I get this down I should also be able to change temps from C to F.
- NOTICE: Starting March 24th, we've shifted to a mandatory user Account upgrade (donation) to post here. Once you've created an account, see the SITE SUPPORT section at the bottom on how to upgrade. This is to help try and cover site costs, and reduce redundant and argumentative posts. Search and read before staring a new thread, most topics are well covered here. We still require ONE post in the Intro section (bottom of the main Forum section list) to introduce yourself: NO QUESTIONS THERE - THEY WILL BE DELETED. Small $ donations via our link above will not be considered. Also to NOTE, the owner of this website lost his home in the LA Wildfire storm in January; See the USA section for more details. Your consideration and understanding on use of this site is expected. It's NOT a free social media platform - decades of time and personal money are invested. We have a zero tolerance policy on attacks. Do NOT write us direct and ask questions unrelated to the Forum, we do not offer Tech support direct, they will be deleted.
Changing kph to mph
- Thread starteractivpop
- Start date
- Joined
- Jun 26, 2011
- Messages
- 6,518
- Reaction score
- 8,283
You need to go into DIAGNOSTICS entering the two codes.
The first one will be USER CODE which if it has not been set then is 5 zero's.
Next will be the Service Code which for the Stelvio NTX is 10695 then you will be able to access and change display from miles to kilometers.
Ok, I reread page on diagnostics and setup. What I don't understand and what it doesn't tell me is how to enter the codes to get to setup. Is it using another diagnostic tool or is it all contained in the dash? What switch or knob toggles you through the menu? Does it assume the user aready knows how to do this? Attached is the page I have referenced from the manual.
I appolgize for for my ignorance, but these electronics and efi settings are all new to me. I come from a past world of older twin engine carburated Ducatis and BMW's. I have a lot to learn.
I appolgize for for my ignorance, but these electronics and efi settings are all new to me. I come from a past world of older twin engine carburated Ducatis and BMW's. I have a lot to learn.
Read the section on handle bar controls. The controller is on the left cluster. It takes presses and side movements to get to where you want to go. Not as simple as the 2006 Breva system.
- Joined
- Jun 26, 2011
- Messages
- 6,518
- Reaction score
- 8,283
It’s not ignorance. It’s the unwillingness to read the manual completely.
Start at page 29 of the Owners Manual and please Read. Keep reading for several pages. Every single thing you want to know and do is written right there.
I cannot explain it any shorter than the manual.
You absolutely must read. Sorry.
We are always willing to provide motivation.
- Joined
- Jun 26, 2011
- Messages
- 6,518
- Reaction score
- 8,283
Abusus non tollit usum
You did. Scott forgot the Julius Caesar quote; I came, I saw, I conquered. I'm so old I took two years of Latin in high school. I figured I couldn't hurt a dead language.
