• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.

dead 2012 Stelvio Help?

Forseti

Forseti

Cruisin' Guzzisti
Joined
Sep 7, 2009
Messages
181
Reaction score
1
Location
Napanee
So I rode it two days ago. Worked perfectly.

This morning I changed the left side exhaust gasket at y pipe.

Tried to start it afterwards. Turn key and..... NOTHING. no click, no dash, no fuel pump. The only thing that powers up is the 12V outlet.

Checked every fuse I know of. (under clocks, behind right side cover and right side by battery) all removed tested and reinserted.
All good.

Battery shows 12.8V, cleaned posts etc.
Even tried to boost.

Out of ideas now......


Anyone?
 
As it turns out I just found the problem.

The cable that connects to the underside of the starter had been disturbed when I removed the starter cover in order be able to move the header far enough to get the header out of the Y pipe and replace the gasket. The wires that go to the 02 sensor are connected to the inside of the cover limiting the amount I could move the header.
This connection at the bottom of the starter had failed when removing the cover.
 
Forseti said:
I thought the ground connected at the top of the starter but it would appear it is at the bottom but there is one attached at the top too so not quite sure.
Click to expand...

That is puzzling, but if she runs now it doesn't really matter.
 
You must log in or register to reply here.
Back
Top