And this oil filter leak is on the V7 III’s ?
As Vagrant said, no. This is on the CARC bikes.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
And this oil filter leak is on the V7 III’s ?
Apparently many have found that the UFI oil filters leak. MGNA recommends a Bosch oil filter if you find that UFI filters leak. Since I had to tighten the UFI more than usual to stop the filter from self-lubing on the outside, I will ignore the manual and use a Bosch filter next time.
Did my fluid changes last night,.
As a Test I set the torque wrench at 20Nm put a socket on that would fit over a 1/2 square drive a challenged myself to a duel - 20Nm is nothing.... my hand tight with the palm ratchet is probably more than that, but i’ve Never stripped a bolt by hand...
Precisely. I am constantly befuddled at what people are using a torque wrench for. First off, no wet or oily bolt can be torqued by torque wrench. You will get a hugely inaccurate reader ng and put way too much pressure on the bolt, most likely breaking it.
Second, oil filters are so easy...spin on until the oil coated rubber ring begins to snug up, then add 1/2 turn and stop. Never had one fail yet.