Brian in FL
Just got it firing!
- Joined
- Apr 3, 2009
- Messages
- 1
I've been running a PC III on my '01 Cali for years now. When I first got it mapped, Todd even tweaked it a bit for me and sent me an updated map. Anyway, as the bike got older the map wasn't as good as it was (and I'm too cheap to get a new map), so I just put a zero map in it and tweaked the low, mid and high buttons by "seat-of-the-pants". Always has worked great for me.
The other day I set my TPS and balanced the TB's, and just did the PCIII adjustment to suit me (low two clicks up, mid and high at the middle). Bike runs great. It's a Cal Special with modified airbox and some MAC pipes and 60k miles.
The question is does anyone know the TPS voltage (or RPM's) the PCIII reads to differentiate between the low, mid, and high settings? Thanks!
The other day I set my TPS and balanced the TB's, and just did the PCIII adjustment to suit me (low two clicks up, mid and high at the middle). Bike runs great. It's a Cal Special with modified airbox and some MAC pipes and 60k miles.
The question is does anyone know the TPS voltage (or RPM's) the PCIII reads to differentiate between the low, mid, and high settings? Thanks!