Chaminda
Tuned and Synch'ed
You don’t have to remove the drive shaft to get in to the spline.It would be kinda hard to get it onto the splines without removing the driveshaft no ? Peter
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You don’t have to remove the drive shaft to get in to the spline.It would be kinda hard to get it onto the splines without removing the driveshaft no ? Peter
Yeah sure. Still you have to undo the whole swing arm to have access for swingarm pivot area.If you simply undid the clamps on the Swing arm CV boot you could inject some grease - without doing any harm ?
( I am guessing / asking )
Maybe you could show us how you can get grease into the splines without removing the driveshaft ?
I have no personal experience with the V7 models . Peter
Maybe you could show us how you can get grease into the splines without removing the driveshaft ?
I have no personal experience with the V7 models . Peter