• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.

V85TT valve clearance

K

Kurt999

Tuned and Synch'ed
Joined
Apr 10, 2023
Messages
34
Reaction score
9
Location
Tenterden UK
I searched but failed.

Measurements in mm

V85TT Euro 5. Factory manual states 0.1 in 0.15 ex

I saw a video, maybe from someone here that said better aim for 0.12 in and 0.17 ex

Old small blocks are usually 0.15 in and 0.20 ex I believe

I wonder if the new smaller clearances are to try and quieten the engine a little more.

What do the experts do?

Thanks

K999
 
Was wondering the same. For what it’s worth, both my 21 V85TT and 22 V7850 spec .10 intake / .15 exhaust under the seat. EF463CD1-E6CA-4D66-8804-755592FED430.webp
 
Nor do I on my V7 850. I think Piaggio doesn’t want us to service our bikes; I believe the law in the States allows home servicing without voiding the warranty.
 
All done, nice easy job...so much easier than my previous speed triple!!

Feel like I'm starting to bond with the bike now!
😁
 
davethewelder said:
In the USA we have the “Moss act” basically we can service our bikes/ cars using any brand maintenance products without losing warranty.
Click to expand...
We have to take our bikes to the dealer for service, get a stamp in the book, then bring them home and do the job properly 😁

My old Speedy only saw the dealer twice excluding MoT test ( annual inspection for roadworthiness).

Every single item on the Triumph service schedule was done with a photographic history and all receipts and mileages logged. Fetched a very respectable price when the time came.

Fortunately I didn't have any warranty issues in the first 2 years tho. We have something vaguely similar to the Moss Act, but in practice it's hard to defend if the bike is self maintained and you're not a 'trained' mechanic.
 
Kurt999 said:
I wonder if the new smaller clearances are to try and quieten the engine a little more.
Click to expand...
Yes.

I stand corrected. I actually do now recall seeing that sticker on a ‘22 V85TT. With titanium valves, unless it’s a race engine that is frequently serviced, (refer to any modern zero warranty dirt-bike intervals and replacement recommendations) we’ll still be setting them to the looser .15/.20mm spec.
Though I’m not a metallurgist, from real world experience, titanium can be quite brittle when simply torqued a few times, much less high-temp heated and hammered repeatedly. ;)

For those here long enough may remember…

2021 V85 TT valve issue

Hi all,I'm a new owner of a 2021 V85TT, that's just having it's first service completed today. I'm sure as some of you may have heard MG are recalling the model due to possible faulty valves. The strange thing about the recall is that MG don't seem to have the parts readily available to...
www.guzzitech.com www.guzzitech.com
 
GTM® said:
Yes.

I stand corrected. I actually do now recall seeing that sticker on a ‘22 V85TT. With titanium valves, unless it’s a race engine that is frequently serviced, (refer to any modern zero warranty dirt-bike intervals and replacement recommendations) we’ll still be setting them to the looser .15/.20mm spec.
Though I’m not a metallurgist, from real world experience, titanium can be quite brittle when simply torqued a few times, much less high-temp heated and hammered repeatedly. ;)

For those here long enough may remember…

2021 V85 TT valve issue

Hi all,I'm a new owner of a 2021 V85TT, that's just having it's first service completed today. I'm sure as some of you may have heard MG are recalling the model due to possible faulty valves. The strange thing about the recall is that MG don't seem to have the parts readily available to...
www.guzzitech.com www.guzzitech.com
Click to expand...
I set mine as above. Stock E5. 2337 miles. May be snake oil but feels smoother and more responsive. Stupidly I didn't measure what I had, so it could be they were tight even against the 0.1/0.15 spec, I'll never know.
 
I have a 2022 V85TT USA spec, picked up a couple of weeks ago. Manufacture date is marked as 06/2022. I do not have the emission control info sticker under the seat. Unless it's under the glove box! Seems unlikely.
Just did the first service, I set the valves to 0.15/0.20 - actually the left side was already spot on! Sounds great, no ticking noise.
I must say, the bright blue 75/140 oil is a bit weird! Also a total PITA refilling the final drive.
 
I don't know about the emissions sticker as I'm not stateside.

I definitely felt a positive difference using those valve clearances.

Re filling the final drive, yes PITA. Next time I'll see about unscrewing the breather and filling from the top. I think the rear wheel has to come out to do that but it's got to be easier than filling via the fill hole. You put 160cc in right?
 
Kurt999 said:
I don't know about the emissions sticker as I'm not stateside.

I definitely felt a positive difference using those valve clearances.

Re filling the final drive, yes PITA. Next time I'll see about unscrewing the breather and filling from the top. I think the rear wheel has to come out to do that but it's got to be easier than filling via the fill hole. You put 160cc in right?
Click to expand...
Measure of what you drain out
and fill The same amount back in!
 
Haven't some been misfilled at the factory?? I could be wrong about that.

Factory service manual says drain it warm and refill with 160ml

😁
 
Last edited:
lemans850i said:
Measure of what you drain out
and fill The same amount back in!
Click to expand...
I humbly disagree. Too many mistakes made by factories and other people. The rear needs 160 max and if you put that much in a quart bottle with a tapered nozzle, cut off a bit then put on a piece of fuel line and it's an easy fill. Don't take off the breather. Going from memory here ,but the six speed calls for 700cc and most use 650cc. Change it too, as many mistakes were made here also.
 
The emissions decal is on the bottom of the seat on my 2021. It calls for 0.10 mm intake and 0.15 mm exhaust.
 
D'oh! Didn't think about the seat - sure enough, there it is.
I used a straw to refill the final drive, with a tiny funnel. Fuel line would be better!
I measured how much came out, a bit under 150ml. Put in about 160. I couldn't see the oil level through the check / fill hole afterwards, but the bright blue showed on the gear teeth inside when I spun the wheel!
 
You must log in or register to reply here.
Back
Top