calicouk001
Just got it firing!
First of all id like to say hello at least, im curently rebuilding a 1100 i, its come from the coast out of some ones garage so have spent the last 2 weeks cleaning stuff up and breaking down.
Ive been working through things as this is my first guzzi, going through and making nice earths for the electrics and polishing up alot of aluminum.
Anyways, im taking my time with this build, electrics and earths first, which brings me to the ECU unit.
I understand the its limited, i see it has the black pig tail at the side for connecting a PC so i at least may Diagnose any issues or do a reset if i wish too.
What i id like to know is, options? i understand some people have this units rebuilt, that comes back with software and cable and..away you go tune up the injection ect, ect.
ive been reading about 1 guy in australia that does this.
So can anybody please start me out, im going to at least need to run diag on the bike so where can i get this VDSTS and cable or is there a better way of going about this, like a power comander or something?.
i know this may seem a little premature of me as i have plenty of stuff to be working through, yet the bik does actually run, just not to well. Ive all ready come across a busted air temp sensor and i belive the oil temp sensors gone to? i was getting a oil light on the dash( pre start up) that used to go out with the battery light upon start, this has now stopped comming on since i tryed to clean it with Electrical contact cleaner.
it may be just off as i disconected it and reconnected it and the ecu is not picking it up.
anyways, with out the VDSTS i have no place to start from.
if you can help, please do.
thanks
MIke.
Ive been working through things as this is my first guzzi, going through and making nice earths for the electrics and polishing up alot of aluminum.
Anyways, im taking my time with this build, electrics and earths first, which brings me to the ECU unit.
I understand the its limited, i see it has the black pig tail at the side for connecting a PC so i at least may Diagnose any issues or do a reset if i wish too.
What i id like to know is, options? i understand some people have this units rebuilt, that comes back with software and cable and..away you go tune up the injection ect, ect.
ive been reading about 1 guy in australia that does this.
So can anybody please start me out, im going to at least need to run diag on the bike so where can i get this VDSTS and cable or is there a better way of going about this, like a power comander or something?.
i know this may seem a little premature of me as i have plenty of stuff to be working through, yet the bik does actually run, just not to well. Ive all ready come across a busted air temp sensor and i belive the oil temp sensors gone to? i was getting a oil light on the dash( pre start up) that used to go out with the battery light upon start, this has now stopped comming on since i tryed to clean it with Electrical contact cleaner.
it may be just off as i disconected it and reconnected it and the ecu is not picking it up.
anyways, with out the VDSTS i have no place to start from.
if you can help, please do.
thanks
MIke.