• NOTICE: The owner of this website and GTMotoCycles.com completely lost his home on the morning of January 8th in the L.A. Wildfire Storm. Most of his neighborhood is gone, and a few friends were killed along with their pets. The GTM SHOP and STORE are functioning normally, but we DEMAND EXTREME PATIENCE on orders as we are a SMALL business and Todd usually has his hands on nearly every order before it goes out. You can find more info on a post named L.A. Wildfires in the USA section. Our heart and best go out to everyone effected in this horrific disaster.
  • Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.

Cal1400 REGISTRY & Pics thread - ADD YOUR BIKE

D.O.P.=Feb. 29, 2024. 8900 miles
Didn't find anything else from GTM on it unfortunately...... It did have the MG comfort-gel seat, backrest/rack, driving lights and leather bags when I got it. I've added the medium screen, heated grips and touring bars with a Garmin sat nav.
I do love that the wiring was already there for the accessories, and my bum knee loves the floorboards. 👍
 
2016 Moto Guzzi Audace, VIN ZGULCU00GM200116.

Bought at PCH Powersports in Southern California. John Hoke (my brother-in-law) hired your shop in early 2018 to do the custom work on this Audace that he received as a gift from Piaggio Group in appreciation for serving on one of their boards. John was in the process of moving back to Portland from Boston at that time, and so had the finished bike shipped up here.

Sadly, though, the Audace never was titled or registered in Oregon. I've ridden it a handful of times (it's power and sound are astounding), but otherwise it has sat. I'm currently navigating the mess of DMV bureaucracy to get a title and registration in Oregon (CA title and registration were lost long ago), and then will sell the bike as-is. Considering its age (2016), mileage (currently 335 miles), and condition (essentially sitting for 7+ years), I'm struggling to research an appropriate price - or even price range. You know this particular bike very well - better than anyone - and so I'd be grateful for any thoughts or suggestions you have on the matter.

David

1720044541448.jpeg
 
Picked up at (now long defunct) PCH Pwrsprts. 100% customized by me/GTM in Orange, CA.
In fact JUST posted about this bike on #664 above. Funny irony that it surfaced.

The bike was delivered to the PCH dealer. I personally picked it up and took it to my shop for the customization, a duplicate of my friend and Piaggio Architect Greg Lynn’s Audace (which I happen to have his bike in my shop right now as well). I never mentioned your B.I.L. John here, so thanks for doing so. He was a new rider at the time I believe, so I asked if it should be delivered to get stored. That didn’t happen.
The dealer went out of business a few years ago, so if the bike was never registered, that will be a tough one. Best to you with it.
Once the bike has been properly revived/serviced, a fair price would be $6500-7500 tops. It will take a special buyer. Hope that helps. Thanks again for the info and post here on it!
 
Dave Byer (floridabound58 @yahoo.com)
Stillwater NY
purchased on 7/22/24 ( original owner purchased in South Carolina)
Vin#ZGULVC005FM200192 2015 California Tourer
My 7th Guzzi Now own 2001 California special, 2014 Harley Fatboy, 2012 Yamaha V Star 1300 tourer, and a 1976 Triumph Bonneville

15 guzzi 1.webp
 
Long time rider here who has been away for nearly 7 years. Previous bikes include a '99 Laverda 750S, '99 Moto Guzzi Sport 1100, and an '09 Aprilia RSV1000R. My Dad was a huge Guzzi fanatic and he passed his love of Italian machinery on to me. He passed this April after a long battle with cancer. I had been missing 2 wheeled life, but it just wasn't a high enough priority for me to look for a machine that moved me enough to buy. A few days ago I was just wasting time scrolling through Facebook marketplace when a '17 MGX-21 popped up. I wasn't real familiar with it so I clicked on the ad and read. It wasn't in bad shape, but is surely needed some TLC to get it back to where it should be. But the price was worth taking a gamble on. So I made the hour drive with my mechanic yesterday to check it out. And the deal wasn't too good to be true after all. I'm now the owner of that sexy carbon coated machine. Very happy to have found this forum and look forward to soaking up all the knowledge I can!

VIN#ZGULCUA08HM000114 - Zach - Shreveport, LA - 8.24

Guzzi1.jpgGuzzi2.jpg
 
MrKiwi here (David), Lower Hutt, New Zealand.

2014 Moto Guzzi California Custom. VIN ZGULV0020EM112276. Purchased 4th July 2024.

This is my second California, I had previously owned a 2014 Tourer. My new to me 2014 Custom was first registered in Japan in 2017. Just over 6,300kms when I purchased it, I have since done about 1,000km on it. I purchased this as a damaged used import from Japan and I'm busy fixing and replacing parts (cosmetic damage).

IMG-20240721-142717-755-1.jpg

IMG-20240806-152319-621-2.jpg

I have reworked the seat to make it more comfortable for my wife to pillion on.

IMG-20240720-092556-3.jpg

Installed hand guards too.

IMG-20240713-103802-4.jpg
 
Last edited:
I recently bought a used (Japanese imported) 2014 California Custom. It had been damaged, with cosmetic damage to the front crash bars, the pannier crash bars and foot pegs. I'm in the process of fixing these blemishes as well as making some changes to the bike, such as an aftermarket windscreen, hand guards and a reconfigured seat (used a local car upholsterer to do that). Pic below.

IMG_20240720_092640_303.jpg
 
I'm Chris von Stein, cvsisinthehouse @ yahoo.com
This is my 2016 Audace Carbon, painted in Italian flag colors.
Vin is ZGULCU006GM200005 I'm in Maryland, got the bike in NC
I've added some 3s since my post here last summer.

No sir, I am not Italian, dont be ridicolo...

I just painted my Audace in the Italian flag colors. I dont really like white so just did a 2" racing stripe. I like the sound of the Supertrapps vs the Mistrals that were on it. Gonna put my signature 3s on it as well.
www.guzzitech.com www.guzzitech.com

GEDC0106.JPG
 
VIN# ZGULCUB04LM000179
Just purchased this beautiful bike from State 8 Motorcycles in Cuyahoga Falls, OH. It was previously owned and listed here by the previous owner. I managed to track down the previous owner who graciously answered some questions I had about the bike and even sold me (at a very fair price) the original mufflers that were removed when he installed the Mistrals. Currently I am arranging shipping from Ohio to my local area. Hope to be riding it soon.

IMG_4187.webp
 
Skysailor said:
Just purchased this beautiful bike from State 8 Motorcycles in Cuyahoga Falls, OH. It was previously owned and listed here by the previous owner.
Click to expand...
Congrats and welcome to the GT Forum & Guzzi Famiglia. Glad to see the Registry working as hoped for future owners. Enjoy the site.
 
I purchased this beauty last year. Right before I took possession of the bike I broke my collar bone
and had to wait many months before doc said I could lift more than a coffee cup. Then some other
issues happened and net result has been almost no time on the bike. But looking forward to some
seat time later this year. I started a thread yesterday with some pics but can't find why the thread
doesn't show up. I was kind of curious what you all though about blue anodize for the valve covers?
Anyway, I just relocated the license plate. The lighting turned out a bit different than I envisioned.
I might remake the it with the lights a bit taller so they shine more down on the license plate vs across
the license plate. Anyway, I curious on the feed back of some blue items on the bike.

Front Left.webpLP LEDs.webpRear View.webp
 
Outlier986 said:
I purchased this beauty last year. Right before I took possession of the bike I broke my collar bone
and had to wait many months before doc said I could lift more than a coffee cup. Then some other
issues happened and net result has been almost no time on the bike. But looking forward to some
seat time later this year. I started a thread yesterday with some pics but can't find why the thread
doesn't show up. I was kind of curious what you all though about blue anodize for the valve covers?
Anyway, I just relocated the license plate. The lighting turned out a bit different than I envisioned.
I might remake the it with the lights a bit taller so they shine more down on the license plate vs across
the license plate. Anyway, I curious on the feed back of some blue items on the bike.
Click to expand...
Glad you've healed up. Blue valve covers look great. Mine are powder coated. I've been running them for about 7 years now. Good luck.

6A81480F-0BA2-484C-AAFD-70E4834A78A3.webp
 
Outlier986 said:
I purchased this beauty last year. Right before I took possession of the bike I broke my collar bone
and had to wait many months before doc said I could lift more than a coffee cup. Then some other
issues happened and net result has been almost no time on the bike. But looking forward to some
seat time later this year. I started a thread yesterday with some pics but can't find why the thread
doesn't show up. I was kind of curious what you all though about blue anodize for the valve covers?
Anyway, I just relocated the license plate. The lighting turned out a bit different than I envisioned.
I might remake the it with the lights a bit taller so they shine more down on the license plate vs across
the license plate. Anyway, I curious on the feed back of some blue items on the bike.
Click to expand...
Would look good if you remove the paint to reveal polished metal along the top of the cooling fins on the valve cover, no matter what color you go with. That's my .02
 
You must log in or register to reply here.
Back
Top