Guzzi offers a (dealer installed option - so no instructions come with) factory heated grip kit; https://gtmotocycles.com/products/oem-heated-gripsI can't seem to get my heated grips to function on the 2012 NTX. I can see the function in the display when activated. I can't see any electrical feed to the grips. My assumption is this that these are not the heated grips. Could some one with a Canadian spec NTX post photos of the grips Left & Right to show the electrical feeds to each grip. I am assuming heated grip were an standard on the the NTX model for Canada.
Finding the connectors: Remove the left side cover and look for two small white connectors with a green wire and blue (w/black stripe) wire. Follow the large wire harness back feeling for unused connectors.
These are located on the left side of the frame, tucked into the harness, above the head by the frame down tube as shown below. The other white connector left of the two we are looking for is the factory connector for the fog lamps.
The left side grip has it's own plastic tube with set screws and shown below. The right side requires removing the throttle cables, switch assembly/ The grips only work when the bike is running, so start up the bike to test.
Last edited: