- Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
- Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
- There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
PC-V & AutoTune 300 on Cal 14
- Thread starterGTM®
- Start date
Stefano Paggetti
Just got it firing!
I'm going to change my riding style a little and see how it goes. It's always hot here 80 to 90 during the day.
kiwi dave
GT Reference
Under 30 mpg does seem a little poor compared to mine. Perhap's check for brake binding?
Joe Chandler
Tuned and Synch'ed
I installed my PCV and AutoTune yesterday. Took me 15 hours (wouldn't recommend if you don't know these bikes). I finished up by calibrating the throttle postitions and my o2 sensor on the left side (facing forward) starting smoking. Any idea what I may have done wrong?
Did you follow the guide w/wiring? Was it wiring smoking or coming from the inner pipe?
My installations were w/M15 and 5AM so not much help. Paul might chime in he installed his or his son.
My installations were w/M15 and 5AM so not much help. Paul might chime in he installed his or his son.
Joe Chandler
Tuned and Synch'ed
I've never done any work on any motorcycle, however, after many sessions of trial and error I did everything according to the instructions. It only happened the first time I fired up the bike. It has since stopped. I can't ride the bike yet cause I haven't gotten my new map back from Todd yet, but it seems like it may have been some residual grease or something else. Seems I posted out of shear terror that I had ruined my bike because of inexperience. But I think all is well. Thanks Steve.
It's pretty difficult to ruin a Guzzi. The one I did I had a file already upon install. They all worked out fine. After around 6 runs w/autotune was about great.
Working it up now for you. As stated in the instructions, DO NOT RUN the bike until you have the ECU flash done, it will cause many issues. I'll chat via email.
Tony Stroud
Just got it firing!
You wont be disappointed once Todd gets it tuned, you'll have a really good improvement in performance and a great sense of satisfaction that you installed it yourself. Good luck and enjoy.
Just did this to my 2014 Cali. No exhaust mods yet, my h pipe has been welded. I’m a one year owner of the two owner bike. It’s old, yes, fixed some issues via the forum here, then installed the fuel system mods, and I can say it truly is night and day. I don’t like loud sharp exhaust, and I ride two up on this, and Canada dollar and taxes bring the pretty, full exhaust knocking on 4000 dollars. That is my largest problem getting the exhaust, because with no dealers present within 6-7 hours, I would have to keep this forever. I may end up doing that anyway, and if I do I’ll likely get the header set up to avoid other exhaust issues. Great site, contributors and products! Found my new bike to love.
D
Deleted member ANutt
Guest
Curious as to what companies/suppliers make a tuner for the 1400 series.
Low post count, so you're fairly new here. I have several threads in this section dedicated to exactly this, and if you click on the (GTM) STORE tab opt of page and sort by model under Fueling, you'll find the link below. be sure to read the reviews there and on the topics in this section. Nothing else compares. It's a handful of money, but like all good things, they cost $ on an expensive big motorcycle.
I've combined your post with this thread. Start from the beginning and read down.
gtmotocycles.com
I've combined your post with this thread. Start from the beginning and read down.
PC-6/AT300/GTM 5AM/7SM ECU Flash Tool
Power Commander 6 w/AutoTune-300 & GTM® ECU Flash Tool Programmer This is a FULLY dynamic system. Includes our GTM Flash Tool with the PC-6 and AutoTune-300 – w/two Bosch wide band 02-sensors to replace the OEM narrow band 02-sensors. Note: The stock fuel system is NOT dynamic/adaptable like...
gtmotocycles.com
Hi, what autotune have u used on the Cali?
kiwi dave
GT Reference
PC-6/AT300/GTM 5AM/7SM ECU Flash Tool
Power Commander 6 w/AutoTune-300 & GTM® ECU Flash Tool Programmer This is a FULLY dynamic system. Includes our GTM Flash Tool with the PC-6 and AutoTune-300 – w/two Bosch wide band 02-sensors to replace the OEM narrow band 02-sensors. Note: The stock fuel system is NOT dynamic/adaptable like...
gtmotocycles.comBest investment yet I've made for the 1400.PC-6/AT300/GTM 5AM/7SM ECU Flash Tool
Power Commander 6 w/AutoTune-300 & GTM® ECU Flash Tool Programmer This is a FULLY dynamic system. Includes our GTM Flash Tool with the PC-6 and AutoTune-300 – w/two Bosch wide band 02-sensors to replace the OEM narrow band 02-sensors. Note: The stock fuel system is NOT dynamic/adaptable like...