• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.

User Code - Programming Procedure Help (again)

Chocaholic

Chocaholic

Tuned and Synch'ed
Joined
Mar 24, 2021
Messages
29
Reaction score
6
Location
NE Georgia, USA
I’ve reviewed several threads on this topic but not finding the specific steps I need. My 2014 Cali Touring came with one key and no discernible user code (I’ve tried everything). My dash and one working key is at Carmo NL and they were able to program a second working key, but unable to learn the user code.

Once installed on the bike, you are supposed to be able to set a new user code with two working keys (which I will have once received back from Carmo NL). I’m worried that I could deprogram my only working keys by doing it wrong. Another option is to forget about having a user code now that I have a spare key, but prefer to have the code if possible without too much risk.

Can someone post a step-by-step procedure to set a user code with only two working keys?
 
Last edited:
This is probably not what you want to hear , but , I intentionally made sure there would be no user code on mine . Peter
 
I checked the Owners Manual.

There are 3 references to "User Code'

Page 29:
SERVICE ALARM
In case of failure found in the instrument panel or in the electronic control unit, the
instrument panel signals the failure by displaying the word SERVICE and the red
general warning light turns on.
02_18
If there is an immobilizer failure at ignition, the instrument panel requests you to enter
a user code. If the code is entered correctly, the instrument panel signals the failure
by displaying the word SERVICE and the red general warning light turns on.

Page 38:
CODE CHANGE
This function is used to modify an old code. Once you have entered this function, the
following message is displayed:
"INSERT YOUR OLD USER CODE"

Page: 39:
After recognising the old code, the new code is requested and the display shows the
following message:
"INSERT YOUR NEW USER CODE"
If it is the first time a code is stored, only the new code is requested.

No reference on these pages to Keys.
 
Chocaholic said:
I’ve reviewed several threads on this topic but not finding the specific steps I need. My 2014 Cali Touring came with one key and no discernible user code (I’ve tried everything). My dash and one working key is at Carmo NL and they were able to program a second working key, but unable to learn the user code.

Once installed on the bike, you are supposed to be able to set a new user code with two working keys (which I will have once received back from Carmo NL). I’m worried that I could deprogram my only working keys by doing it wrong. Another option is to forget about having a user code now that I have a spare key, but prefer to have the code if possible without too much risk.

Can someone post a step-by-step procedure to set a user code with only two working keys?
Click to expand...

I don't think the User Code and The Keys are related.

Page 22:

The instrument panel has an immobilizer which prevents start-up in case the system
does not identify a key which has been programmed before.

The vehicle is supplied with two keys already programmed. The instrument panel accepts
a maximum of four keys at the same time: contact an Official Moto Guzzi dealer
to enable these keys or to disable a key that has been lost
 
Moto-Uno said:
This is probably not what you want to hear , but , I intentionally made sure there would be no user code on mine . Peter
Click to expand...
Interesting. Why and how did you do that? If the need for a user code can be removed, would that negate the need for key programming?
 
Last edited:
I have to plead stupid here . When I picked mine up (new) , I saw the code light come on , but since nothing
was set I simply start it and ride , no problems with around 15k kilometers on it. I'd have to ask the dealership if
there was anything they did before delivery ( which I doubt ) . Peter
 
Thanks Peter. I’m guessing your user code is 00000. As long as you’re using your original keys, you’d never need to know that.
 
I recently purchased another Breva 1100 and removed the old user code and put in 00000, now when I turn on the ign it asks for a user code, it disappears as soon as I touch the mode button or move trip 1 to trip 2. It starts and runs fine and but I dont think you can have all zero's. I'll put in the vin number when i get a chance
 
That's a bit confusing , you put in all zeros and it starts and run fine and then you mention you don't think you
can have all zeros ? Peter
 
The user code is only used if the key fits the bike, ie turns on the ign but is not programmed to the bike or the receiver coil is faulty around the lock, my keys are programmed to the bike. My other bike which has a valid user code doesn't bring up the request for a user code
 
You must log in or register to reply here.
Back
Top