V7-850 Mods Thread

[kildareman]

Current state of play. Back to the LSF fly screen, with a Wunderlich spoiler on top! Works a treat. Monza cap back on following advise from - can't remember who. Additional spacer fitted. Oh and the the MG "single seat". The tape is for when I have the rear rack on to stop rubbing on the seat.

 

[rogerdj]

V-7 850 Special, I have fitted the factory screen. I note the brackets that hold the headlight and attach around the upper fork legs, can have the bolts loosened and the headlight and screen can then be adjusted for height either upwards or downwards. This seems to offer an easy way to adjust the screen height by up to 50mm.
Is there any reason you cant simply make this adjustment? before I go off and ride mine adjusted..

 

[lemans850i]

I don’t think it’s gonna not going to work because the speedo stays static and you move up and towards the back ... hitting speedo

 

[rogerdj]

I moved it up enough so it was about 10mm below bottom of speedo and rev counter and have done a decent ride, I dont think the wind noise changed and if anything it was maybe worse, so have gone back to the original position height

 

[daredavidmx831]

I removed the passenger handle rail on my special 2021 V7, but didn't like the common washer look so I fabricated 2 sets of these washers in Stainless steel since they were not easy to find cheap or ASAP. I can share the other pair if someone is interested in grabbing it, send me a message I'm in LA area (Downey). No sales its just a gift so invite me a beer! No shipping neither, needs to be local, LOL.

 

[rwortman]

Dart screen and OEM rack with a little Nelson Rigg ADV bag on it for my shield cleaner and compressor/patch kit. 2023 SE seems to fuel perfectly and the Arrow exhausts sound OK. Put a little Beeline Moto on the handlebar clamp. I have other bikes for throwing around and touring so probably not much more to do to it. I like the factory bar end mirrors enough that I bought some Puig ones that are similar for my SV650. Yeah, the OEM rack costs too much but I think it looks better than either of the alternatives.

 

[rogerdj]

I removed the passenger handle rail on my special 2021 V7, but didn't like the common washer look so I fabricated 2 sets of these washers in Stainless steel since they were not easy to find cheap or ASAP. I can share the other pair if someone is interested in grabbing it, send me a message I'm in LA area (Downey). No sales its just a gift so invite me a beer! No shipping neither, needs to be local, LOL.View attachment 30093

Snap, did the same on mine when installed the Givi Top Box rack with Shock Factory shocks.

 

[AAAltered]

Added some Spots with Halos, along with a dedicated on/off switch/relay/fuse….

 

[bosco659]

Dart screen and OEM rack with a little Nelson Rigg ADV bag on it for my shield cleaner and compressor/patch kit. 2023 SE seems to fuel perfectly and the Arrow exhausts sound OK. Put a little Beeline Moto on the handlebar clamp. I have other bikes for throwing around and touring so probably not much more to do to it. I like the factory bar end mirrors enough that I bought some Puig ones that are similar for my SV650. Yeah, the OEM rack costs too much but I think it looks better than either of the alternatives.

nice! Is the Dart flyscreen the same for the ‘21+ Special and Special Edition?

 

[James Guffman]

So I appear to have lost a db killer from my Mistral long exhaust....That's ok I just removed the other one and changed to uncorked map but I really would like to have the option of putting db killers back in....does anybody know where to get them from? Do I have to contact Mistral?

 

[kildareman]

So I appear to have lost a db killer from my Mistral long exhaust....That's ok I just removed the other one and changed to uncorked map but I really would like to have the option of putting db killers back in....does anybody know where to get them from? Do I have to contact Mistral?

Yup. They are very easy to talk to and respond quickly,

 

[Robert_C]

Has anyone managed to put some bark busters (or other quality handguards), on their V7-850?

You can see, in the picture below, that I have some cheap ones installed, but those are not really handguards, they are just cheap plastic. I put them on for winter commuting and have decided that I like them, but I want something better. The only other things I have seen are also just unsupported plastic. Short of making my own, does anyone have any handguard suggestions?

 

[scott_m]

Barkbuster on their website, list several options for the V7 with photos.

 

[Robert_C]

That is where I looked first, they are all single point. I suspect they will be no better than what I have.

 

[scott_m]

Barkbusters are very sturdily made. Not at all like eBay stuff or Amazon...

I have the single point ones on my Ural. They are perfect.

Good Luck.

 

[James Guffman]

I removed the passenger handle rail on my special 2021 V7, but didn't like the common washer look so I fabricated 2 sets of these washers in Stainless steel since they were not easy to find cheap or ASAP. I can share the other pair if someone is interested in grabbing it, send me a message I'm in LA area (Downey). No sales its just a gift so invite me a beer! No shipping neither, needs to be local, LOL.View attachment 30093

What are the washer dimensions out of interest?

 

[daredavidmx831]

Current state of play, changed the mirrors for bar ends, installed the agostinis exhaust. Needs refueling for sure, stalls a bit at low revs. branded

 

[Moto_Max]

why are you riding without refueling?

 

[rwortman]

nice! Is the Dart flyscreen the same for the ‘21+ Special and Special Edition?

I think so. The Dart website will tell you what you need. I think the screens are mostly the same. Mounting brackets differ.

 

[daredavidmx831]

why are you riding without refueling?

LOL! Budget to say the least! I don't want to share my poorness here.