From what I understand the stock suspension was designed for a 155-175lb rider so you probably won't gain much by swapping out springs. other low cost/no cost things are to change fork oil viscosity, spacer length, and of course check tire pressure.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks Kyle, be sure to get the set with springs. Everything is outlined in the first post if this thread... however, do start with the preload settings that will be provided in the paperwork.I will be ordering the fork kit this week for my 14' v7 racer. As far as spacers and such I'm about 195 with gear, you have any idea what I should set my sag at and all that jazz
No, not needed for the V7 Kit.Is a spring compressor tool needed to install the matris v7 Kit?
I'm still in a field of moving boxes to properly answer, but from memory, yes, 32mm deep... or you can run the preload adjuster all the way in and the standard socket fits I'm pretty sure, no?32mm is right but just want to make sure before I buy the deep socket in 32mm.
I'm still in a field of moving boxes to properly answer, but from memory, yes, 32mm deep... or you can run the preload adjuster all the way in and the standard socket fits I'm pretty sure, no?