I remember those commercials. What a bunch of hooey!
-
Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
-
Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
-
There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
Mindis V7-850 Mods
- Thread starter Mindis
- Start date
- Joined
- Jun 26, 2011
- Messages
- 6,506
LOL These are my working hands, they're the only ones I got. They got cuts, oils, sawdust, getting smacked with hammer, nailed, skinned knuckles, they can build virtually anything from nothing, are rough af, but the nickname "magic hands Mindi" is not because of all thatMadge says “You need to soak your hands in Palmolive and find a new manicurist!”.
Pic is from 2ish weeks ago, 3in framing nail. Pulled it out, slapped on a bandaid, carry on. I just had to skip the ride that day LOL
You need to be paying attention to where you point that thing -OUCH !
kildareman
Cruisin' Guzzisti
Lucky that missed the bone.
At one point a few years ago after a run of hand injuries, including severing flexor tendon on my pinky I went to my Dr with another injury. He said there's no point in another tetanus shot as I was full up with the stuff
At one point a few years ago after a run of hand injuries, including severing flexor tendon on my pinky I went to my Dr with another injury. He said there's no point in another tetanus shot as I was full up with the stuff
Mindis, how long are you going to wait until you reveal the photo is a hoax? Well done though.
LOL These are my working hands, they're the only ones I got. They got cuts, oils, sawdust, getting smacked with hammer, nailed, skinned knuckles, they can build virtually anything from nothing, are rough af, but the nickname "magic hands Mindi" is not because of all that
Pic is from 2ish weeks ago, 3in framing nail. Pulled it out, slapped on a bandaid, carry on. I just had to skip the ride that day LOL
- Joined
- Jun 26, 2011
- Messages
- 6,506
..but the nickname "magic hands Mindi" is not because of all that
They say that particular self-pleasing behavior causes blindness.
I call that BS coz my vision is still 20/20They say that particular self-pleasing behavior causes blindness.
Episode #457. Cheap Amazon saddlebags. Since they're not symmetrical, one bag's overlapping part stays pressed by the wind, and the other lifts like a parachute until magnet clips give up and it starts flopping in the wind. Zippers still holds my sandwiches and coffee thermos so I just cut them off. I can easily adapt any bags to my rack and I'll get something better eventually but that'll do for this summer.
You’ve got the sewing machine from when you did the seat could you « adjust » them …
I sure can, but I'm not willing to put time and effort to this. Those saddlebags are not there to look good, they're there just to serve the purpose, which they do as they are. So, meh, that'll do...
So far so good
I'm keep on checking them but all looks good. Not warped, not loose, no shifting, they're on solid. The other day it was windy as hell and I sure felt that wind on my rear wheel LOL
Well, insurance on my bike is out this Sunday, weather turns crap for the winter, it's time to park Rosetta for more mods till spring. I was planning to get out one more time to my favorite twisties but we're just after a little storm and there's already bunch of wet leaves and pine needles on the road, so I called my riding season closed...
@DeadEye thought I might be done with my mods but fear not my friends, I'll keep yas entertained through the whole winter! LOL
To keep the suspense going, like a trailer for movie, I'll share my plans for this winter's mods
1. Rear brakes. No, I'm still not happy with my rear brakes... I plan turn my rear calipers backwards on the axle until bleeding nipple faces upwards, or at least level, and make a torque arm for it. Then I'm thinking of relocating my ABS unit under the gearbox. This way highest point for rear brakes will be caliper's bleeding nipple, and front brakes have no such issue anyway. I'll replace all the lines with stainless steel braded ones. I'm aware that it will increase the length of front brake lines and that the front might become spongy, I'm prepared to do the front with solid lines all the way to the tripples and have short braded line from solid to front's master.
2. Exhaust. I like loud pipes but zippin at 140-160kmh for half a day with nearly straight pipes is a bit much...LOL I'll be making a manual cut-out system to my existing mufflers so I can restrict when I want to.
3. Windscreen. I'll be making a quick attachable windscreen onto existing headlight bucket for longer rides, it'll be more function than form this time
4. As a part of me wanting to tour more, I'll be building a one-wheel-pull-behind lightweight trailer. I have all the parts needed already except mild steel tubing. I'll start a separate thread on that build once I have something to show.
And there's few other things on my mind if I have time for them. Mainly cosmetic so not important. Somebody needs to invent 72 hours in a day, I've more projects than that LOL
@DeadEye thought I might be done with my mods but fear not my friends, I'll keep yas entertained through the whole winter! LOL
To keep the suspense going, like a trailer for movie, I'll share my plans for this winter's mods
1. Rear brakes. No, I'm still not happy with my rear brakes... I plan turn my rear calipers backwards on the axle until bleeding nipple faces upwards, or at least level, and make a torque arm for it. Then I'm thinking of relocating my ABS unit under the gearbox. This way highest point for rear brakes will be caliper's bleeding nipple, and front brakes have no such issue anyway. I'll replace all the lines with stainless steel braded ones. I'm aware that it will increase the length of front brake lines and that the front might become spongy, I'm prepared to do the front with solid lines all the way to the tripples and have short braded line from solid to front's master.
2. Exhaust. I like loud pipes but zippin at 140-160kmh for half a day with nearly straight pipes is a bit much...LOL I'll be making a manual cut-out system to my existing mufflers so I can restrict when I want to.
3. Windscreen. I'll be making a quick attachable windscreen onto existing headlight bucket for longer rides, it'll be more function than form this time
4. As a part of me wanting to tour more, I'll be building a one-wheel-pull-behind lightweight trailer. I have all the parts needed already except mild steel tubing. I'll start a separate thread on that build once I have something to show.
And there's few other things on my mind if I have time for them. Mainly cosmetic so not important. Somebody needs to invent 72 hours in a day, I've more projects than that LOL
Episode #550. Rotating rear calipers.
Ideally for torque arm to be most effective, caliper's arm should be at 90deg to it, ish:
But this way bleeding nipple still facing down a bit, what defeats the purpose of this mod. It wouldn't be that bad, considering that it's upside down originally LOL
With bleeding nipple facing upwards a tad, caliper's arm becomes at ~130deg in relation to torque arm's mounting point. That would escalate a lot of pull on torque arm when braking:
Last option is my favorite so far but it would cost me a lot of weight....
Caliper hides behind my number plate bracket, bleeding nipple is plenty upwards, but caliper's arm (just clearing the bottom of the axle) is nearly in the line with torque arm's mounting point. What means that torque arm's job of push/pull becomes to bend... And because it would not be in a straight line, there would be a lot of extra pull on it as well. I could weld a really solid I-beam like bracket that would be touching swingarm right under the axle to use it as a leverage point. That's my idea so far but I'll have to brew on it for a while. I'll leave it sitting for a bit and do some more brainstorming
Ideally for torque arm to be most effective, caliper's arm should be at 90deg to it, ish:
But this way bleeding nipple still facing down a bit, what defeats the purpose of this mod. It wouldn't be that bad, considering that it's upside down originally LOL
With bleeding nipple facing upwards a tad, caliper's arm becomes at ~130deg in relation to torque arm's mounting point. That would escalate a lot of pull on torque arm when braking:
Last option is my favorite so far but it would cost me a lot of weight....
Caliper hides behind my number plate bracket, bleeding nipple is plenty upwards, but caliper's arm (just clearing the bottom of the axle) is nearly in the line with torque arm's mounting point. What means that torque arm's job of push/pull becomes to bend... And because it would not be in a straight line, there would be a lot of extra pull on it as well. I could weld a really solid I-beam like bracket that would be touching swingarm right under the axle to use it as a leverage point. That's my idea so far but I'll have to brew on it for a while. I'll leave it sitting for a bit and do some more brainstorming