• Ciao Guest, The owner of this website and GTMotoCycles.com lost his home completely on the morning of January 8th in the L.A. Wildfire Storm. Most of his neighborhood is gone, and a few friends were killed along with their pets. The GTM SHOP and STORE are functioning normally, but we DEMAND EXTREME PATIENCE on orders as we are a SMALL business and Todd usually has his hands on nearly every order before it goes out. You can find more info on a post named L.A. Wildfires in the USA section. Our heart and best go out to everyone in this horrific disaster.

Search results for query: USER CODE

  • Order by relevance
  1. O

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    And as a buyer of MG product I see a serious prob with this. Awareness of the issue being PRIMARY concern to me.Key#1 (comes with bike) - gets dropped in creek, down toilet etc, gone) Has AUTH#1 Key#2 (comes with bike, - at home in a 'safe' place has 'codeNUM' (I have dementia, 'lost' stuff...
  2. scott_m

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    Yes, to program/register a new, different transponder key, requires BOTH the USER CODE and an already registered key.To overwrite the USER CODE, requires 2 previously and currently registered/programmed to the dash, each with their own transponder code, keys. CLONED KEYS ARE READ BY THE...
  3. O

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    I followed what you wrote. - Need 2 keys (already programmed/matched to dash) in order to reset "user code" in the dash - The dealer can NOT do this user code reset - To create a new (3rd or 4th) key I need 1 key and user code.So where I am at (& prob not explaining very well), is : I NEED to...
  4. 404p

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    OK, never mind I thought I had found post#1, but then I found more! This was the important information I was missing
  5. R

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    Without the user code and only one key, you can only clone the existing key. You will be in the same situation as now but with two identical keys. Some locksmiths can do this and perhaps dealers too. Only Carmo in The Netherlands can make and program new keys and give access to a new user code...
  6. 404p

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    ...Something I dont see in the thread though is about adding newly cut keys with new transponders into the dash. Can dealers do that? In my case, I only have one key and I dont have the user code. Can a dealer program new keys with the new transponders? Your posts seem to imply that is possible.
  7. scott_m

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    This above, is also incorrect.USER CODE is entered into the dash upon the first using of the motorcycle when it was brand new. If you don’t enter one to store, it will remind you each time you start the bike.The USER CODE is a owner selectable code used to OVERRIDE the security system in...
  8. 404p

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    I dont think you did. Look at your manual or your dash. In my case the manual describes a mode selector - one of those modes is "change user code". This is the code that must be programmed into any new key, but first you have to know the user code before you can program it into anything.
  9. O

    Scott's How To Recover The 5 Digit Security Code. (CARC Dashboards)

    ...need 2 keys to program a 3rd, it seems prudent to get a 3rd (&4th?) key cut before actually losing a key. Did I get that correct? And that "user code" I somehow entered when I first turned on the bike, you say the dealer can't reset that one, ummm (I was just fiddling, honest, didn't mean to...
  10. F

    How to check new bike for key code?

    I don't think they are implying that. When I spoke with them, I had a list of questions to ask, and one of those was is there two keys, but I had no idea of the security system, so I listened for what I was expecting to hear. I'll contact them again and ask about the keys. But in either case...
  11. GTM®

    How to check new bike for key code?

    ...a privately funded website to help owners, and not a moronic social media platform. That said…IF the dealer is being honest and the bike starts with the plastic housed key, then no user code has been entered, and you are good to go. Are they implying that the all metal key also starts the bike?
  12. john zibell

    How to check new bike for key code?

    ...good to go. The fact that one key is just metal means it has no chip. You should have two keys with a chip. You can get a second key with a chip and if you have entered your user code, then you can program the second key. This is all contingent with the key with the chip asks for the user...
  13. john zibell

    First time Guzzi owner question

    You can send it to Carmo to see if it can be repaired. Also provide a new key and the key already programmed and they will program them to the dash. Then you can enter a user code. I recommend using the maintenance code for the bike. You only have to remember one code.
  14. B

    First time Guzzi owner question

    Thanks for the link to Scott’s information. I’ve read through it and understand that you can’t bypass the user code. So, I have a Stelvio with a dashboard that does not work. The screen goes blank a few seconds after starting the engine. Am I correct in saying then that my only option to...
  15. john zibell

    That Infernal Service Light

    User code is different from service code. Read the manuals on line. If you upgrade your account they are available in the downloads section. https://www.guzzitech.com/forums/threads/user-account-upgrade-donations.14025/ If you still have the broken key, the chip in it may be read. See if a...
  16. C

    New V100 Owner

    ...code message comes up for 10s and then disappears. I was not sure how to set it but have tries going through the service menu to "change user code". I have followed the instructions and set a new code, rather than the factory 00000. However, whenever I turn on the ignition I still get the 10s...
  17. B

    First time Guzzi owner question

    ...of the purchase, so I was there yesterday for them to install it. But it turned out that it was a used dashboard which they didn’t have the user code for, so they couldn’t get it to work. My new guy question is …. Is there a way to get around this user code or will it require a new...
  18. scott_m

    How To Recover The 5 Digit Security Code

    Hi Skip,Glad that you found it helpful!Scott
  19. Skip Stauber

    How To Recover The 5 Digit Security Code

    Well, I did not have the old USER code so I read the user/maintenance book and posts 10,16 and 54. Inserted first key, turned on, applied service code 34534 for Cal 14, went to recovery, it read 1st key and requested 2nd, turned off and immediately inserted 2nd key to on, it asked for NEW code...
  20. Pete BoBeet

    How To Recover The 5 Digit Security Code

    Scott, I don't mean to tick you off or anything...God knows you've helped me and others many, many times with your factual and timely advice (Do you ever SLEEP?), but I do have a simple request, since this seems to happen so often. Is there any way you or some other computer-savvy person here...
Back
Top